Electronic and Embedded Systems Engineering MSc 2017-18This course also available for 2018-19 entry
About the course
This course focuses on the fast-growing and challenging area of embedded systems and digital electronics, a rapidly expanding area of modern technology. Its impact and potential are increasingly evident in devices used in commerce and industry. There are expanding applications with enhanced features for end users in industry, instrumentation, health care, entertainment, science and robotics.
This course offers a progression route for graduates who studied electrical and electronic engineering, control systems, computer science or related disciplines with knowledge of immediate relevance to industry.
It is also suitable for more experienced engineers, who require a course to enhance their technical and managerial education. The industrial relevance of the course is of prime importance; it offers flexibility in the subjects studied whilst retaining coherence.
Hands-on experience is gained through a major individual research project.
18 / 09 / 2017
1 year full-time
Entry requirements for this course are normally one of the following:
• The normal entry requirement for a Master's degree is an Honours degree (2:2 or above) in electronic engineering or related disciplines or an equivalent professional qualification.
• Other qualifications and/or experience that demonstrate appropriate knowledge and skills at Honours degree standard may also be acceptable.
• The normal entry requirement for the Postgraduate Diploma course is a degree or equivalent qualification. A lower level qualification together with appropriate experience or, exceptionally, substantial industrial experience alone may also be acceptable.
For applicants whose first language or language of instruction is not English you will need to meet the minimum requirements of an English Language qualification. The minimum of IELTS 6.0 overall with no element lower than 5.5, or equivalent will be considered acceptable.
Admissions and Marketing Office
Tel: +44(0)1484 473116
20(this number may be subject to change)
Huddersfield, HD1 3DH
This module aims to provide a critical review of the hardware and software aspects of microcontroller interfacing. The software will be implemented in C programming language using PC’s as the hardware platform. Industry standard software tools will also be utilised in designing embedded systems.
The module extends your design skills in both software and hardware in implementing microcontrollers in embedded systems.
Planning an Advanced Technical Project
This module provides the opportunity to undertake a programme of independent work to plan, and undertake background research for, an advanced technical project. Successful completion of this module will entitle you, if required, to progress to a full Masters level project based on the planning and background research undertaken in this module.
The module compares the design of asynchronous and synchronous controllers, error correction codes and error detection strategies for high reliability systems using Hardware Description Language (HDL) tools. It then develops an understanding of electronic testing and Design For Testability (DFT), covering both Application Specific Integrated Circuit (ASIC) and board test. It develops abilities in the design of test strategies and in the application of DFT techniques to enhance testability.
This module has been designed to build on your skills in modelling, designing, processing and simulating a range of analogue and digital systems. To support you in this the module reviews the hardware and software aspects of virtual instrumentation (VI). You’ll have the opportunity to use graphical and C/C++ programming languages using PC’s and interface cards as the hardware platform. Industry standard software tools (such as LabVIEW) will also be explored to help design and simulate real systems.
Parallel Computer Architectures Computer Clusters
Many existing and future computer-based applications impose exceptional demands on performance that traditional computer systems cannot offer. Large-scale computational simulations for scientific and engineering applications now routinely require highly parallel computers. The availability of powerful computers and high-speed networks as low-cost commodity components are changing the way computers are used. This module will focus on large-scale distributed and parallel systems such as: "cluster computing" in local-area-networks, "grid computing" and “cloud computing”. The aim of this module is to provide an in-depth introduction to Cluster technologies and their applications in scientific computing and engineering. The hands-on laboratory exercises will provide the necessary practical experience with Cluster middleware software required to construct Cluster, MPI programming and benchmarking parallel systems and applications.
This module aims to develop improved understandings of the strategic aspects of programme and project management and its role in adding competitive advantage to your enterprise. You will have the chance to gain a firm grounding in the principles, processes, tools and techniques that underpin programme and project management, but also be encouraged to challenge traditional thinking in the field. Concepts, standards and techniques for project and programme lifecycle management are introduced, developed and applied, with the aid of industrially relevant case material. Emphasis is placed upon the need for competence in project planning and control. Team-working, communication and risk management skills are developed by means of group activity. Extensive use is made of project management software.
Advanced Technical Project
The project provides the opportunity to undertake a major programme of advanced independent work. It requires you to investigate a chosen topic and achieve specified technical goals through good planning and the application of analytical, problem-solving and design skills. The project is developed in collaboration with either an industrial company or within one of the research groups in the School. Your supervising tutor will monitor progress and provide guidance in various aspects of the project including preparation of the final report.
You will undertake a Major Research Project which is supervised by a member of staff. Every effort is made to obtain an industrial based project but all projects are real and relevant.
We will always try to deliver your course as described on this web page. However, sometimes we may have to make changes as set out below.
We review all optional modules each year and change them to reflect the expertise of our staff, current trends in research and as a result of student feedback. We will always ensure that you have a range of options to choose from and we will let students know in good time the options available for them to choose for the following year.
We will only change core modules for a course if it is necessary for us to do so, for example to maintain course accreditation. We will let you know about any such changes as soon as possible, usually before you begin the relevant academic year.
Sometimes we have to make changes to other aspects of a course or how it is delivered. We only make these changes if they are for reasons outside of our control, or where they are for our students’ benefit. Again, we will let you know about any such changes as soon as possible, usually before the relevant academic year. Our regulations set out our procedure which we will follow when we need to make any such changes.
When you enrol as a student of the University, your study and time with us will be governed by a framework of regulations, policies and procedures, which form the basis of your agreement with us. These include regulations regarding the assessment of your course, academic integrity, your conduct (including attendance) and disciplinary procedure, fees and finance and compliance with visa requirements (where relevant). It is important that you familiarise yourself with these as you will be asked to agree to abide by them when you join us as a student. You will find a guide to the key terms here, where you will also find links to the full text of each of the regulations, policies and procedures referred to.
The Higher Education Funding Council for England is the principal regulator for the University.
100% of graduates from courses in this subject area go onto work and/or further study within six months of graduating.
Previous graduates from courses in this subject area have gone on to roles such as Test Progress Engineer, Telecommunications, Software Technicians and Systems Engineer in organisations such as Cummins Turbo Technologies, National Grid, Havard Engineering Ltd, and GCHQ*.
*Sourced: DHLE stats 13/14
Professional links and accreditations
Accredited by the Institution of Engineering and Technology on behalf of the Engineering Council as meeting the requirements for Further Learning for registration as a Chartered Engineer. Candidates must hold a CEng accredited BEng/BSc (Hons) undergraduate first degree to comply with full CEng registration requirements.
You will have the opportunity to work within modern facilities, including an impressive range of professionally equipped electronic project, embedded systems and computer work-station laboratories with industry research standard software and measurement instruments.
How much will it cost me?
In 2017/18, the full-time tuition fee for UK and EU postgraduate students at the University of Huddersfield will generally be £5,100 (see Fees and Finance for exceptions). Tuition fees will cover the cost of your study at the University as well as charges for registration, tuition, supervision and examinations. For more information about funding, fees and finance for UK/EU students, including what your tuition fee covers, please see Fees and Finance. Please note that tuition fees for subsequent years of study may rise in line with inflation (RPI-X).
If you are interested in studying with us on a part-time basis, please visit our Fees and Finance pages for part-time fee information.
If you are an international student coming to study at the University of Huddersfield, please visit the International Fees and Finance pages for full details of tuition fees and support available.
Please email the Student Finance Office or call 01484 472210 for more information about fees and finance.
Research degrees are also available in this area. Contact us for details.
A Master's course is 180 Master's level credits, which would normally take one calendar year full-time study. Interim awards are available at Postgraduate Certificate level or Postgraduate Diploma level should you decide to exit the course early. Please contact us for details of the credits required for these interim awards.
For advice and guidance on your postgraduate study options join us at the next Postgraduate Open Day or contact us.
Our research courses involve in-depth study of a specific field across the engineering discipline. If you wish to undertake longer term, highly focussed research, we offer a number of flexible routes to PhD. For more information see http://www.hud.ac.uk/research/
If you are an international student (including EU) you can check if you meet our entry requirements (both academic and English language) by visiting our country pages.
If you do not meet the entry requirements you can consider completing a degree preparation programme (if you are from a country outside of the EU) at the University's International Study Centre (ISC) or you can call the ISC on +44 (0) 1273 339333 to discuss your options. You can also complete the online application form or to ask a question please fill in the enquiry form and talk to one of our multi-lingual Student Enrolment Advisers.
If your English language is not at the required level (IELTS 6.0 overall), we have a range of Pre-Sessional English programmes that you can enrol on before starting your degree programme. You will not need to take an IELTS test after completing one of our Pre-Sessional English programmes.
How to apply
We hope you are interested in what you have seen and want to apply to join us.
If you are planning to study part-time, please get in touch with the contact in the 'At a glance' section above.
Research plays an important role in informing all our teaching and learning activities. Through research our staff remain up-to-date with the latest developments in their field, which means you develop knowledge and skills that are current and highly relevant. For more information see the Research section of our website.