University of Huddersfield Logo

Portrait of Professor Xiangqian (Jane) Jiang Professor Xiangqian (Jane) Jiang

x.jiang@hud.ac.uk | 01484 473634



Biography

Jane began her career as a very young apprentice and spent 20 years in the Chinese automotive industry finishing her industrial career as a fully qualified Engineer. In 1990, she started her academic life as an MSc student. She obtained her PhD in measurement science in 1995. She was awarded a Chair in 2003, a DSc for precision metrology in 2007 and the Director of the EPSRC Centre in Advanced Metrology 2011. Jane possesses both industrial and academic backgrounds in measurement science and precision engineering and enjoys creative research moving the subject forward. Jane’s research involves two major aspects: optical interferometry technology for fast on/in-line surface/geometry measurement; and mathematical modelling with characterisation technology for surface metrology. Besides this, she enjoys philosophical research in this subject area, successfully leading a Paradigm Shifts Review in Surface Metrology (Proc. Roy. Soc. A, 2007) and a 2011 Royal Society Discussion Meeting “Ultra Precision Engineering – from Physics to Manufacturing” (Phil. Trans. R. Soc. A 2012).

Jane has published over 230 papers, author/co-authored 8 books and several patents on measurement science/surface metrology. Currently, she holds a prestigious Frontier Research Programme (Advanced Scheme) sponsored by the European Research Council for well-established word-leading researchers. She is a principle member of ISO/TC 213 and BSI TW/4, as well as an Advisory Member for the UK National Measurement System.

Jane was awarded a Royal Society Wolfson Research Merit Award and the Outstanding Asian Woman of Achievement Award in 2006. She is a Fellow of Royal Academy of Engineering (FREng), a Fellow of Institute of Engineering Technologies (FIET), a Fellow of Royal Society of Arts (FRSA) and a Fellow of the International Academy of Production Research (FCIRP).

Research & Scholarship

Research Direction

Mathematical and Instrumental Based Surface and Precision Metrology. It includes five aspects as follows:

  • Fundamental Surface Measurement Theory and Applied Techniques
  • Optical Measurement and Instrumentation
  • Freeform Surface Metrology
  • Wavelet Theory and Beyond
  • Geometrical Products Specification and Verification

She has published more than 190 papers on measurement science and surface metrology, has three principle papers in the Proc R. Soc. Lond. A. She has written one book, co-authored four books and has been an editor for two special issues for the Institute of Physics in the UK 2006.  She has been awarded £2.5 million in research funds (from research councils, industry and overseas). She is a principal member of TC/213 committee 'Dimensional Geometrical Products Specification and Verification' and the BSI TW/4 committee 'Engineering drawing, metrology, precision measurement and all related documentation', a DIUS Measurement Advisory Committee Member and Consultant expert to China TC 240 Standardisation Committee.

She was awarded a Royal Society Wolfson Merit Award in March 2006, becoming the first Royal Society Wolfson Research Fellow from a new University in any subject area.  She was awarded a UK national prize, the Outstanding Woman of Achievement Award – The Lloyds TSB AWA (Asian Woman Achievement) Award on 2006. She was also awarded the title: Fifth most influential woman of Chinese origin in 2006, by the Woman of China.

Prof. Jiang is a Fellow of the Institute of Engineering Technology (IET), a Fellow of the Royal Society of Arts, Manufacture and Commerce (RSA) and a Member of the International Academy of Production Engineering (College International pour la Recherche en Productique, CIRP). Professor Jiang was presented to the Queen and the Duke of Edinburgh as one of the 'People who have made a significant contribution to national and regional life in 2006' at a Buckingham Palace Reception on 19th December 2006. She has been an Ambassador of Huddersfield since 2006.

External Research Funding:

Current Research Grants and Their Subjects:

  • EPSRC, EPE0237111-UPS2-03, In-situ Real-time Measurement for Micro-Structured Surfaces on the Drum DTM, (2009-2010) 192,242 GBP
  • ERC, ERC-AdG-228117, Fundaments and Principles for Measurement and Characterization of 21st Century Science and Engineering Surfaces, (2009-2014) 1,895,152 EURO
  • EPSRC, EP/E032242/1, New Geometrical Filtration for Ultra Precision Manufactured Products, (2008-2010) 198,068 GBP
  • EPSRC, EP/E03733X/1, Concept and Feasibility Study for a Optical Chip (2007-2010), 456,405GBP
  • Royal Society, 502011.K640,Wolfson – Research Merit Award, (2006 - 2011), 77.5K GBP
  • Taylor Hobson Industrial Project SURFSTAND, 2002-2011 £990K GBP 50%
  • NSFC (China) 50535030, Measurement Theory and Technology for MEMS-Tessellation Type Surfaces, (2006-2010), 400K RMB

Completed Research Grants and Their Subjects:

  • EPSRC, EP/D503841/1, UK-China Nanometrology Network (2005), 18,021 GBP
  • EPSRC, GR/S13316/01, Wavelet Theory and Representation for Surfaces (2003-2006), 119,706GBP
  • EPSRC, Studentship (2004-2009), DTA, 21,982 GBP
  • Leverhulme Trust, F01582B,Visiting Professorship (2005), 13,850 GBP
  • Royal Society, 2005/R1-CH, International Incoming Fellowship (2005 - 2006), 18,200 GBP
  • Industry, PhD Studentship, Complex Surface Fitting (2005-2008), Taylor Hobson, 38,586 GBP
  • DTI, ISO TC213 SSfM-3 (2004-2007), BSI, 6,000 GBP
  • CSC(China), Collaborate Research Students (Post-doc. PhD students) (2007-2009), 80K GBP
  • Germany, Co-Research MSc studentship (2007-2008), Erlangen Uni., 10K GBP
  • MOST(China), 2002BA906A20, Development of Fundamental ISO GPS (2004-2006), 1,200K RMB
  • MOST(China), 2002BA906A21, International GPS Standard Project (2003-2006), 600K RMB
  • MOE (China), MOE 0301, Development of Fundamental ISO GPS Project (2003-2004), 500K RMB
  • MOE (China), MOE 1999, Cheung Kong Professor Programme Awards, (2000-2005) and Best PhD Dissertation Awards (2000-2004), 1,500K RMB
  • NSFC (China), 50025514, Chinese Outstanding Young Scientist Awards (2001-2005), 800K RMB

Research Supervision

  • PhD First/Second Supervisor: Completed 9/5 and On-going 12/3
  • Supervision for post-doctoral researchers, Current: 5 and previous 10.

Other Esteem Factors (After 2000)

  • European Research Council (ERC) Peer Review Member (2009 to 2013)
  • EPSRC Peer Review College Member
  • NSFC Overseas Peer Review Fellow
  • The Best Paper Award at the 10th CIRP Conference on Computer Aided Tolerancing, 21 -23 Mar. 2007 Erlangen, Germany
  • Conference Programme Chair, '11th International Conference on the Metrology and Properties of Engineering Surface', 16–20 July 2007,University of Huddersfield, UK
  • Co-Chairman of the Programme Committee, The Eighth International Symposium on Measurement Technology and Intelligent Instruments, 25–27 September2007, ISMTII2007, Sendai, Japan
  • Member of Program Committee, Asia Pacific Conference on Optics Manufacture 2007, 11th to 13th January 2007, Hong Kong
  • Member of International Program Committee, The tenth CIRP International Seminar on Computer Aided Tolerancing “Specification and Verification for Assemblies, 21st to 23rd March 2007, Erlangen, Germany
  • President of the International Committee on Measurements and Instrumentation Sep. 2005 – Sept 2007
  • Conference Chairman, The Seventh International Symposium on Measurement Technology and Intelligent Instruments, 6th to 8th Sept. 2005, University of Huddersfield, UK
  • Fellow of Chinese Society of Measurement and Instruments Jun. 2004 –
  • Honorary chair for the State Key Laboratory for International standard for mechanical engineering, Education Ministry of China, Mar. 2004 –  
  • External Examiner, State Key Lab of Tsinghua University, Beijing, China Aug. 2004 –
  • Co-Chairman of the Scientific Committee and Organising Committee, The sixth International Symposium on Measurement Technology and Intelligent Instruments, 28th Nov. to 1st Dec. 2003, Hong Kong
  • Member of the Programme Committee, '9th International Conference on the Metrology and Properties of Engineering Surface', September 10th –11th 2003, Halmstad University, Sweden
  • Member of European Society for Precision Engineering and Nanotechnology Feb. 2002 –
  • Member of the International Organising Committee, 2nd International Symposium Instrumentation Science and Technology, 18th –22nd August 2002, Jinan China
  • Member of the Organising Committee, '8th International Conference on the Metrology and Properties of Engineering Surface', September 27th –30th April 2000, University of Huddersfield, UK
  • Invited Speaker Non-Contact 3D Measurement Methods and Instrumentation, Advances in the Design and Fabrication of Freeform Optics, 21st ~23rd March 2005, Hong Kong
  • Invited Speaker An Internationalization Strategy for Manufacturing Industry and Technical Standards, International Manufacturing Leaders Forum (IMLF 2005), 27 Feb.-2 Mar. 2005, Adelaide, Australia
  • Keynote Speaker Innovative Concepts in Nanometrology (1), The 6th International Conference on Frontiers of Design and Manufacturing, 21-23 Jun. 2004, Xi’an China
  • Keynote Speaker Innovative Concepts in Nanometrology (2), The Second international Symposium on Precision Mechanical Measurements, 24-28 Aug. 2004, Beijing, China
  • Invited Speaker Surface Metrology and Standardisation, International Bearing Industry Exhibition for China, 14-17 Dec. 2003, Shanghai, China
  • Plenary Lecture Review of the next generation GPS, the 2nd International Symposium on Instrumentation Science and Technology, 18 -22 Aug. 2002, Jinan, China
  • Invited Speaker The progress in surface texture, the 2nd International Symposium on Instrumentation Science and Technology, 18-22 Aug. 2002, Jinan, China
  • Invited  Speaker A Review of European Commission Funded Projects in Surface Texture Part II, ISO/TC 213 12th Plenary Meeting, Feb. 2002, Madrid, Spain
  • Invited IEE Speaker  'Novel Techniques for the measurement, identification and classification of Microscopic Surfaces', Dec. 2001, Yorkshire
  • Regular referee to the following Journals:
  • Precision Engineering; Proceedings of the Institution of Mechanical Engineers; Measurement Science and Technology; Physics in Medicine and Biology; Wear; International Journal of Zhejiang University (Editorial Board); Optical communication; Surface and Coatings Technology.

Publications and Other Research Outputs

2014

Qi, Q., Scott, P., Jiang, X. and Lu, W. (2014) ‘Design and implementation of an integrated surface texture information system for design, manufacture and measurementComputer Aided Design , 57, pp. 41-53. ISSN 0010-4485

Williamson, J., Martin, H. and Jiang, X. (2014) ‘Phase Calculation of Spectral Interferograms using Template Matching ’. In: Manufacturing the Future Conference 2014, 23rd – 24th September 2014 , University of Strathclyde

Tang, D., Gao, F. and Jiang, X. (2014) ‘On-line surface inspection using cylindrical lens-based spectral domain low-coherence interferometryApplied Optics , 53 (24), pp. 5510-5516. ISSN 1559-128X

Elrawemi, M., Muhamedsalih, H., Blunt, L., Fleming, L., Martin, H. and Jiang, X. (2014) ‘Comparative study between online and offline defect assessment methods for roll to roll flexible PV modules’. In: 4th International Conference on Nanomanufacturing (nanoMan2014), 8-10 July, Bremen, Germany , pp. 1-5

Muhamedsalih, H., Blunt, L., Martin, H., Jiang, X. and Elrawemi, M. (2014) ‘An interferometric auto-focusing method for on-line defect assessment on a roll-to-roll process using wavelength scanning interferometry’. In: Proceedings of EUSPEN 14th International Conference 2014. Dubrovnik, Croatia: EUSPEN. pp. 177-180. ISBN 978-0-9566790-3-1

Tang, D., Gao, F. and Jiang, X. (2014) ‘Cylindrical Lenses Based Spectral Domain Low-Coherence Interferometry for On-line Surface Inspection’. In: Euspen 14th International Conference & Exhibition, 2nd - 6th June 2014, Dubrovnik, Croatia , pp. 289-292

Lou, S., Jiang, X. and Scott, P. (2014) ‘Morphological filters for functional assessment of roundness profilesMeasurement Science and Technology , 25 (6), p. 065005. ISSN 0957-0233

Lou, S., Jiang, X., Zeng, W. and Scott, P. (2014) ‘Slope transform: a theoretical insight into morphological operations in surface measurement’. In: 13th CIRP Conference on Computer Aided Tolerancing, 11-14 May 2014, Hangzhou, China

Kumar, P., Martin, H., Maxwell, G. and Jiang, X. (2014) ‘Hybrid photonic chip interferometer for embedded metrology’. In: Proceedings of SPIE: Integrated Optics: Devices, Materials, and Technologies XVIII. California, USA: SPIE. p. 89880N.

Hassan, M., Martin, H. and Jiang, X. (2014) ‘Surface profile measurement using spatially dispersed short coherence interferometrySurface Topography: Metrology and Properties , 2 (2), p. 024001. ISSN 2051-672X

Ding, H., Scott, P. and Jiang, X. (2014) ‘A criterion for comparing measurement results and determining conformity with specifications’. In: 13th CIRP Conference on Computer Aided Tolerancing, 11th-14th May 2014, Hangzhou, China

Martin, H., Kumar, P. and Jiang, X. (2014) ‘A hybrid photonics based sensor for surface measurementCIRP Annals - Manufacturing Technology , 63 (1), pp. 549-552. ISSN 0007-8506

2013

Hassan, M., Martin, H. and Jiang, X. (2013) ‘Investigations on measurement speed of spatially dispersed short coherence interferometer’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 43-48. ISBN 9781862181212

Williamson, J., Martin, H. and Jiang, X. (2013) ‘High Resolution Dispersed Reference Interferometry’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 212-217. ISBN 9781862181212

Tang, D., Gao, F. and Jiang, X. (2013) ‘Spectral Domain Low- Coherence Interferometry for On-line Surface Inspection’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 194-199. ISBN 9781862181212

Kumar, P., Martin, H., Maxwell, G. and Jiang, X. (2013) ‘Design of a dispersive lateral scanning surface profilometer’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 159-164. ISBN 9781862181212

Ren, H., Jiang, X. and Gao, F. (2013) ‘Simulation of Tri-sensor Deflectometry for Freeform and Structured Specular Surfaces’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. p. 236. ISBN 9781862181212

Ding, H., Scott, P. and Jiang, X. (2013) ‘Inverse problems of measurement with application on specification of surface profile’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. p. 229. ISBN 9781862181212

Gao, F., Tang, D. and Jiang, X. (2013) ‘White Light Spetral Interferometry for Real Time Surface Profile Measurement’. In: ASPEN 2013, 12-15, November 2013, Taipei, Taiwan , p. 53

Lou, S., Jiang, X. and Scott, P. (2013) ‘Geometric computation theory for morphological filtering on freeform surfacesProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences , 469 (2159), pp. 20130150-20130150. ISSN 1364-5021

Li, T., Blunt, L., Jiang, X. and Zeng, W. (2013) ‘An Information Model for Surface MetrologyProcedia CIRP , 10, pp. 251-258. ISSN 2212-8271

Zeng, W., Jiang, X., Scott, P. and Li, T. (2013) ‘A New Method to Characterize the Structured Tessellation SurfaceProcedia CIRP , 10, pp. 155-161. ISSN 2212-8271

Cui, C., Li, T., Blunt, L., Jiang, X., Huang, H., Ye, R. and Fan, W. (2013) ‘The Assessment of Straightness and Flatness Errors Using Particle Swarm OptimizationProcedia CIRP , 10, pp. 271-275. ISSN 2212-8271

Jiang, X., Abdul-Rahman, H. and Scott, P. (2013) ‘Multi-scale freeform surface texture filtering using a mesh relaxation schemeMeasurement Science and Technology , 24 (11). ISSN 0957-0233

Williamson, J., Martin, H. and Jiang, X. (2013) ‘A Dispersed Reference Interferometer for Surface and Dimensional Metrology’. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK

Lou, S., Jiang, X. and Scott, P. (2013) ‘Identifying and Characterizing Micro-machining Signatures on Freeform Surfaces Using Morphological Methods’. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK , pp. 63-64

Qi, Q., Jiang, X. and Scott, P. (2013) ‘A Knowledge Platform for Surface Texture in Advanced Manufacturing’. In: Manufacturing the Future Conference. Cranfield, UK: EPSRC. p. 60. ISBN 978-1-907413-22-3

Lou, S., Jiang, X. and Scott, P. (2013) ‘An Efficient Divide-and-Conquer Algorithm for Morphological FiltersProcedia CIRP , 10, pp. 142-147. ISSN 2212-8271

Qi, Q., Jiang, X., Scott, P. and Lu, W. (2013) ‘Surface texture specification, the more complete the better?Procedia CIRP , 10, pp. 233-237. ISSN 2212-8271

Muhamedsalih, H., Jiang, X. and Gao, F. (2013) ‘Accelerated Surface Measurement Using Wavelength Scanning Interferometer with Compensation of Environmental NoiseProcedia CIRP , 10, pp. 70-76. ISSN 2212-8271

Hassan, M., Martin, H. and Jiang, X. (2013) ‘Surface profile measurement using spatially dispersed short coherence interferometry’. In: 11th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII) in Aachen and Braunschweig/Germany, 1-5 July 2013, Aachen and Braunschweig, Germany

Qi, Q., Scott, P., Jiang, X., Lu, W. and Ding, H. (2013) ‘The Discussion of Uncertainties in Surface Texture during Design, Manufacture and Measurement’. In: The 11th International Symposium of Measurement Technology and Intelligent Instruments, 1st-5th July 2013, RWTH, Aachen, Germany

Jiang, X., Abdul-Rahman, H. and Scott, P. (2013) ‘Lifting wavelet algorithm for freeform surface filtering using a Gaussian prediction operatorInternational Journal of Precision Technology , 3 (3), pp. 244-260. ISSN 1755-2060

Ding, H., Scott, J. and Jiang, X. (2013) ‘Relational Structure of Measurement with Application on Specification of Freeform Surface’. In: Proceedings of the The 11th International Symposium on Measurement Technology and Intelligent Instruments. Aachen and Braunschweig, Germany: Apprimus Wissenschaftsver. . ISBN 978-3-86359-138-0

Lou, S., Jiang, X. and Scott, P. (2013) ‘Applications of Morphological Operations in Surface Metrology and Dimensional Metrology’. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013) , 17th - 21st June 2013, Taipei, Taiwan , pp. 327-338

Lou, S., Jiang, X., Bills, P. and Scott, P. (2013) ‘Defining True Tribological Contact Through Application of the Morphological Method to Surface TopographyTribology Letters , 50 (2), pp. 185-193. ISSN 1023-8883

Lou, S., Zeng, W., Jiang, X. and Scott, P. (2013) ‘Robust Filtration Techniques in Geometrical Metrology and Their ComparisonInternational Journal of Automation and Computing , 10 (1), pp. 1-8. ISSN 1476-8186

Lou, S., Jiang, X. and Scott, P. (2013) ‘Correlating motif analysis and morphological filters for surface texture analysisMeasurement , 46 (2), pp. 993-1001. ISSN 0263-2241

Lou, S., Jiang, X. and Scott, P. (2013) ‘Application of the morphological alpha shape method to the extraction of topographical features from engineering surfacesMeasurement , 46 (2), pp. 1002-1008. ISSN 0263-2241

Martin, H. and Jiang, X. (2013) ‘Dispersed reference interferometryCIRP Annals - Manufacturing Technology , 62 (1), pp. 551-554. ISSN 0007-8506

2012

Muhamedsalih, H., Gao, F. and Jiang, X. (2012) ‘Comparison study of algorithms and accuracy in the wavelength scanning interferometryApplied Optics , 51 (36), pp. 8854-8862. ISSN 0003-6935

Gao, F., Muhamedsalih, H. and Jiang, X. (2012) ‘In-Process Fast Surface Measurement Using Wavelength Scanning InterferometryAdvanced Materials Research , 622-62, pp. 357-360. ISSN 1662-8985

Qi, Q., Jiang, X., Scott, P. and Lu, W. (2012) ‘Model for a CAD-assisted designing process with focus on the definition of the surface texture specifications and quality’. In: Proceedings of the 37th International MATADOR Conference. Manchester, UK: Springer. pp. 273-276. ISBN 978-1-4471-4479-3

Bills, P., Racasan, R., Hart, A., Skinner, J., Jiang, X. and Blunt, L. (2012) ‘Using metrology to bridge the gap in understanding between engineering and biological failure: the case of metal-on-metal hip replacements’. In: 1st Annual EPSRC Manufacturing the Future Conference, 19th-20th September 2012, Loughborough, UK

Gao, F., Muhamedsalih, H. and Jiang, X. (2012) ‘In-process fast surface measurement using wavelength scanning interferometry’. In: 2012 International Conference on Manufacturing and Optimization , September 15-16, 2012, Beijing, China

Lou, S., Zeng, W., Jiang, X. and Scott, P. (2012) ‘Comparison of Robust Filtration Techniques in Geometrical Metrology’. In: 18th International Conference on Automation and Computing (ICAC) 2012. Leicestershire, UK: IEEE. pp. 1-6. ISBN 978-1-4673-1722-1

Gao, F., Muhamedsalih, H. and Jiang, X. (2012) ‘Surface and thickness measurement of a transparent film using wavelength scanning interferometryOptics Express , 20 (19), p. 21450. ISSN 1094-4087

Jiang, X (2012) ‘Precision surface measurementPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences , 370 (1973), pp. 4089-4114. ISSN 1364-503X

Jiang, X. and Whitehouse, D. (2012) ‘Precision metrologyPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences , 370 (1973), pp. 4154-4160. ISSN 1364-503X

Jiang, X., Shore, P., McKeown, P., Whitehouse, D. and Ruffles, P. (2012) ‘Preface: Discussion Meeting IssuePhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences , 370 (1973), pp. 3829-3830. ISSN 1364-503X

Zhang, H., Blunt, L., Jiang, X., Fleming, L. and Barrans, S. (2012) ‘The influence of bone cement type on production of fretting wear on the femoral stem surface: A preliminary studyClinical Biomechanics , 27 (7), pp. 666-672. ISSN 0268-0033

Jiang, X., Shore, P., McKeown, P., Whitehouse, D. and Ruffles, P. (2012) ‘Introduction: Ultra-precision engineering: from physics to manufacturingPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences , 370 (1973), pp. 3831-3834. ISSN 1364-503X

Wang, J., Jiang, X., Blunt, L., Leach, R. and Scott, P. (2012) ‘Intelligent sampling for the measurement of structured surfacesMeasurement Science and Technology , 23 (8). ISSN 0957-0233

Lou, S., Jiang, X. and Scott, P. (2012) ‘Algorithms for morphological profile filters and their comparisonPrecision Engineering , 36 (3), pp. 414-423. ISSN 01416359

Zeng, S., Blunt, L. and Jiang, X. (2012) ‘The investigation of material removal in bonnet polishing of CoCr alloy artificial joints’. In: Proceedings of the 12th international conference of the european society for precision engineering and nanotechnology EUSPEN 2012. Stockholm, Sweden: EUSPEN. pp. 352-355. ISBN 978-0-9566790-0-0

Jiang, X. and Whitehouse, D. (2012) ‘Technological shifts in surface metrologyCIRP Annals - Manufacturing Technology , 61 (2), pp. 815-836. ISSN 0007-8506

Wang, J., Jiang, X., Blunt, L., Leach, R. and Scott, P. (2012) ‘A boundary segmentation algorithm for extracting microscale dimensional parameters in the measurement of structured surfaces’. In: euspen 12th International Conference and Exhibition, 4 - 8 June 2012, Stockholm, Sweden

Muhamedsalih, H., Jiang, X. and Gao, F. (2012) ‘Accelerated surface measurement using wavelength scanning interferometer with compensation of environmental noiseProcedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing . ISSN 1877-7058

Bills, P., Lou, S. and Jiang, X. (2012) ‘Development of morphological filtering method for specification and characterisation of hip replacement taper junctions’. In: 12th International Conference of the European Society for Precision Engineering and Nanotechnology, 4th-8th June 2012, Stockholm, Sweden

Tian, Y., Wang, J., Peng, Z. and Jiang, X. (2012) ‘A new approach to numerical characterisation of wear particle surfaces in three-dimensions for wear studyWear , 282-3, pp. 59-68. ISSN 0043-1648

Kumar, P., Martin, H., Maxwell, G. and Jiang, X. (2012) ‘Design and development of a self calibrated optical chip interferometer for high precision on-line surface measurement’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. p. 152. ISBN 978-1-86218-106-9

Kumar, P., Martin, H., Maxwell, G. and Jiang, X. (2012) ‘Design and Development of a Self Calibrated Optical Chip Interferometer for High Precision On-line Surface Measurement’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. pp. 14-19. ISBN 978-1-86218-106-9

Zeng, S., Blunt, L. and Jiang, X. (2012) ‘Material removal investigation in bonnet polishing of CoCr alloy’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. pp. 25-30. ISBN 978-1-86218-106-9

Hassan, M., Jiang, X. and Haydn, M. (2012) ‘Fast surface metrology using wavelength scanning and dispersive white light interferometry’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. p. 148. ISBN 978-1-86218-106-9

Lou, S., Jiang, X. and Scott, P. (2012) ‘An Introduction to Morphological Filters in Surface Metrology’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. pp. 7-13. ISBN 978-1-86218-106-9

Hassan, M., Jiang, X. and Martin, H. (2012) ‘Comparison of the fringe visibility created by zero and first order diffracted beams in a dispersive interferometer’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. pp. 110-115. ISBN 978-1-86218-106-9

Feng, G., Wang, X. and Jiang, X. (2012) ‘A Digital Phase-Lock Method for AOD Scanning Measurement SystemInternational Journal of Mechanic Systems Engineering , 2 (1), pp. 42-47. ISSN 2225-7403

Qi, Q., Jiang, X. and Scott, P. (2012) ‘Knowledge modeling for specifications and verification in areal surface texturePrecision Engineering , 36 (2), pp. 322-333. ISSN 0141-6359

Abdul-Rahman, H., Jiang, X. and Scott, P. (2012) ‘Freeform surface filtering using the lifting wavelet transformPrecision Engineering , 37 (1), pp. 187-202. ISSN 01416359

Bills, P., Racasan, R., Underwood, R., Cann, P., Skinner, J., Hart, A., Jiang, X. and Blunt, L. (2012) ‘Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertaintyWear , 274, pp. 212-219. ISSN 0043-1648

Zeng, W., Jiang, X., Scott, P. and Blunt, L. (2012) ‘Diffusion filtration for the evaluation of MEMs surfaceInternational Journal of Precision Engineering and Manufacturing . ISSN 2234-7593

Lou, S., Jiang, X. and Scott, P. (2012) ‘An Efficient Divide-and-Conquer Algorithm for Morphological FiltersProcedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing . ISSN 1877-7058

Zeng, W., Jiang, X. and Scott, P. (2012) ‘A new method to characterize the structured tessellation surfaceProcedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing . ISSN 1877-7058

2011

Jiang, X., Lou, S. and Scott, P. (2011) ‘Morphological method for surface metrology and dimensional metrology based on the alpha shapeMeasurement Science and Technology , 23 (1), p. 015003. ISSN 0957-0233

Zeng, S., Blunt, L. and Jiang, X. (2011) ‘The application of Taguchi approach to optimise the processing conditions on bonnet polishing of CoCrKey Engineering Materials , 496, pp. 235-240. ISSN 1013-9826

Lou, S., Jiang, X. and Scott, P. (2011) ‘Morphological Filters Based on Motif Combination for Functional Surface Evaluation’. In: Proceedings of the 17th International Conference on Automation & Computing, 10 September 2011, University of Huddersfield, Huddersfield , pp. 133-137

Bills, P., Underwood, R., Sayles, R., Cann, P., Hart, A., Blunt, L. and Jiang, X. (2011) ‘Taper Wear in Large Head Metal-on-Metal Hips’. In: International Conference on BioTribology 2011, 18th - 21th September 2011, Imperial College

Jiang, X., Zeng, W. and Scott, P. (2011) ‘Wavelet Analysis for the Extraction of Morphological Features for Orthopaedic Bearing Surfaces’. In: Progress in Molecular and Environmental Bioengineering - From Analysis and Modeling to Technology Applications. London: InTech. . ISBN 9789533072685

Zhang, X., Jiang, X. and Scott, P. (2011) ‘A Reliable Method of Minimum Zone Evaluation of Cylindricity and Conicity from Coordinate Measurement DataPrecision Engineering , 35 (3), pp. 484-489. ISSN 0141-6359

Muhamedsalih, H., Jiang, X. and Gao, F. (2011) ‘Comparison of fast Fourier transform and convolution in wavelength scanning interferometry’. In: Proceedings of SPIE Volume 8082. : SPIE Optical Metrology. p. 80820Q-80820Q.

Wang, J., Jiang, X., Gurdak, E., Scott, P., Leach, R., Tomplins, P. and Blunt, L. (2011) ‘Numerical characterisation of biomedical titanium surface texture using novel feature parametersWear , 271 (7-8), pp. 1059-1065. ISSN 0043-1648

Muhamedsalih, H., Jiang, X. and Gao, F. (2011) ‘Acceleration computing process in wavelength scanning interferometry’. In: 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2011) , 29th June - 2nd July 2011, Daejeon, S. Korea

Zeng, W., Jiang, X. and Scott, P. (2011) ‘A Generalised Linear and Nonlinear Spline filterWear , 271 (3/4), pp. 544-547. ISSN 0043-1648

Wang, J., Jiang, X., Blunt, L., Leach, R. and Scott, P. (2011) ‘Efficiency of adaptive sampling in surface texture measurement for structured surfaces’. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK , pp. 214-218

Wang, J., Jiang, X., Blunt, L., Leach, R. and Scott, P. (2011) ‘Efficiency of adaptive sampling in surface texture measurement for structured surfaces’. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK , pp. 214-218

Lou, S., Jiang, X. and Scott, P. (2011) ‘Fast Algorithm for Morphological FiltersJournal of Physics: Conference Series , 311, p. 284. ISSN 1742-6596

Gao, F., Jiang, X., Muhamedsalih, H. and Martin, H. (2011) ‘Wavelength scanning interferometry for measuring transparent films of the fusion targets’. In: 13th International Conference on Metrology and Properties of Engineering Surfaces 2011, 12th - 15th April 2011, Twickenham, UK , pp. 172-176

Zhang, X., Jiang, X. and Scott, P. (2011) ‘Minimum Zone Evaluation of the Form Errors of Quadric SurfacesPrecision Engineering , 35 (2), pp. 383-389. ISSN 0141-6359

Zhang, X., Jiang, X. and Scott, P. (2011) ‘A Minimax Fitting Algorithm for Ultra-Precision Aspheric Surfaces’. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK

Gao, F., Jiang, X., Muhamedsalih, H. and Martin, H. (2011) ‘Wavelength scanning interferometry for measuring transparent films of the fusion targets’. In: 13th International Conference on Metrology and Properties of Engineering Surfaces 2011, 12th - 15th April 2011, Twickenham, UK , pp. 172-176

Jiang, X., Cooper, P. and Scott, P. (2011) ‘Freeform surface filtering using the diffusion equationProceedings of the Royal Society, A , 467 (2127), pp. 841-859. ISSN 1364-5021

Jiang, X. and Martin, H. (2011) ‘Phase feedback fibre interferometer for surface profilingInternational Journal of Precision Technology , 2 (2/3), pp. 246-265. ISSN 1755-2060

Zeng, W., Jiang, X. and Scott, P. (2011) ‘Roundness filtration by using robust regression filterMeasurement Science and Technology , 22 (3), p. 035108. ISSN 0957-0233

Jiang, X (2011) ‘In situ real-time measurement for micro-structured surfacesCIRP Annals - Manufacturing Technology , 60 (1), pp. 563-566. ISSN 0007-8506

2010

Zeng, S., Blunt, L., Jiang, X. and Bills, P. (2010) ‘Investigation of the material removal characteristic for polishing CoCr alloy’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. pp. 177-182. ISBN 9781862180932

Lu, W., Liu, X., Jiang, X., Qi, Q. and Scott, P. (2010) ‘Categorical data modelling for Cylindricity Consistent with Geometrical Product Specifications Standard SystemProceedings of SPIE: Sixth International Symposium on Precision Engineering Measurements and Instrumentation , 75446S. ISSN 1996-756X

Qi, Q., Blunt, L., Scott, P. and Jiang, X. (2010) ‘Modeling of the concepts in ISO standards for profile surface texture’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. pp. 172-176. ISBN 9781862180932

Qi, Q., Jiang, X., Liu, X. and Scott, P. (2010) ‘An unambiguous expression method of the surface textureMeasurement , 43 (10), pp. 1398-1403. ISSN 0263-2241

Wang, J., Jiang, X. and Blunt, L. (2010) ‘Simulation of Adaptive Sampling in Profile Measurement for Structured Surfaces ’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. pp. 48-53. ISBN 9781862180932

Lou, S., Jiang, X. and Scott, P. (2010) ‘A Fast Algorithm for Morphological Filters’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. p. 190. ISBN 9781862180932

Muhamedsalih, H., Jiang, X. and Gao, F. (2010) ‘Vibration compensation of wavelength scanning interferometer for in-process surface inspection ’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. pp. 148-153. ISBN 9781862180932

Lu, W., Jiang, X., Qi, Q. and Scott, P. (2010) ‘Modeling the integration between specifications and verification for cylindricity based on category theoryMeasurement Science and Technology , 21 (11). ISSN 0957-0233

Gao, F., Jiang, X., Muhamedsalih, H. and Martin, H. (2010) ‘Wavelength Scanning Interferometry for Thin Film Analysis of Fusion Target’. In: 3rd European Target Fabrication Workshop, 30 September-1 October, Oxford

Kong , L., Cheung, B., Jiang, X., Lee, W., To, S., Blunt, L. and Scott, P. (2010) ‘Characterization of Surface Generation of Optical Microstructures Using a Pattern and Feature Parametric Analysis MethodPrecision Engineering , 34 (4), pp. 755-766. ISSN 0141-6359

Bills, P., Underwood, R., Cann, P., Hart, A., Jiang, X. and Blunt, L. (2010) ‘What is required to measure the wear of explanted metal-on-metal hips?’. In: British Orthopaedic Research Society Annual Meeting, 12th-13th July 2010, Cardiff University

Jiang, X., Gao, F. and Wang, K. (2010) ‘Wavelength Scanning Interferometer for Structured Surfaces’. In: ASPE Summer Topical Meeting on Precision Interferometric Metrology, 23rd - 25th June 2010, Asheville, North Carolina, USA , pp. 11-15

Leach, R., Li, T., Jiang, X. and Blunt, L. (2010) ‘Comparison of commercial software packages for calculating surface texture parameters’. In: Proceedings of the euspen International Conference , Monday 31st May - Friday 4th June 2010, Delft, Holland

Jiang, X., Gao, F. and Mateboer, A. (2010) ‘An approach of assessment for ultra-precision V-groove structured surfaces ’. In: Proceedings of the euspen International Conference – Delft - June 2010. Delft, Netherlands: European Society for Precision Engineering & Nanotechnology. .

Jiang, X., Wang, K., Gao, F. and Muhamedsalih, H. (2010) ‘Fast surface measurement using wavelength scanning interferometry with compensation of environmental noiseApplied Optics , 49 (15), pp. 2903-2909. ISSN 1559-128X

Zeng, W., Jiang, X. and Scott, P. (2010) ‘Fast algorithm of the Robust Gaussian Regression Filter for Areal Surface AnalysisMeasurement Science and Technology , 21 (5), p. 055108. ISSN 0957-0233

Zhang, X., Jiang, X. and Scott, P. (2010) ‘Shape recognition and form error evaluation of quadric surfaces’. In: Measurement Systems and Process Improvement (MSPI) 2010 , 19-20, Apr, 2010, NPL, Teddington, UK

Jiang, X., Zhang, X. and Scott, P. (2010) ‘Template matching of freeform surfaces based on orthogonal distance fitting for precision metrologyMeasurement Science and Technology , 21 (4), p. 045101. ISSN 0957-0233

Martin, H. and Jiang, X. (2010) ‘Rapid phase shifting fiber interferometer with optical stylusOptical Letters , 35 (5), pp. 655-657. ISSN 0146-9592

Zeng, W., Jiang, X., Smith, I. and Scott, P. (2010) ‘Transient Signal Separation in Watt Balance ExperimentsPhysics Letters A , 374 (11-12), pp. 1301-1306. ISSN 0375-9601

Xu, Y., Xu, Z., Jiang, X. and Paul, S. (2010) ‘Developing a Knowledge-based System for Complex Geometrical Product Specification (GPS) Data Manipulation.Knowledge Based Systems , 24 (1), pp. 10-22. ISSN 0950-7051

Jiang, X (2010) ‘Robust solution for the evaluation of stratified functional surfacesCIRP Annals - Manufacturing Technology , 59 (1), pp. 573-576. ISSN 0007-8506

2009

Wang, J., Jiang, X. and Blunt, L. (2009) ‘A survey of potential sampling strategies for measurement of structured surfaces.’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. Huddersfield: University of Huddersfield. pp. 184-189. ISBN 9781862180857

Muhamedsalih, H., Jiang, X. and Gao, F. (2009) ‘Interferograms analysis for wavelength scanning interferometer using convolution and fourier transform.’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. Huddersfield: University of Huddersfield. pp. 33-37. ISBN 9781862180857

Zhu, H., Blunt, L. and Jiang, X. (2009) ‘An Active Contour Based Algorithm for Micro-scale Surface Feature Extraction’. In: The Swedish Production Symposium, 2-3 December 2009, Göteborg, Sweden

Zhu, H., Blunt, L. and Jiang, X. (2009) ‘Flexible shape extraction for micro/nano scale structured surfaces.’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. Huddersfield: University of Huddersfield. pp. 190-194. ISBN 9781862180857

Lan, X., Jiang, X., Blunt, L. and Xiao, S. (2009) ‘An adaptive system framework for surface characterisation.’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. Huddersfield: University of Huddersfield. pp. 142-146. ISBN 9781862180857

Blunt, L., Jiang, X. and Scott, P. (2009) ‘Precision and Nanoscale Surface Metrology’. In: International Moulded Optics Conference,, 19-20th Nov 2009, Breman Germany

Zhang, X., Jiang, X., Scott, P. and Cooper, P. (2009) ‘A Fast Point Projection Approach of NURBS surfaces’. In: A4A6 - Algorithms for Approximation VI 2009, 31st August - 4th September 2009, Ambleside, UK

Zeng, W., Jiang, X. and Scott, P. (2009) ‘A Generalised Linear and Nonlinear Spline filter’. In: 12th International Conference on Metrology and Properties of Engineering Surfaces, 8-10 July 2009, Rzeszów, Poland

Blunt, L., Jiang, X., Zeng, W. and Asim, T. (2009) ‘A new way to evaluate steel sheet surfaces’. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia

Gao, F., Wang, K. and Jiang, X. (2009) ‘A high speed scanning heterodyne interferometer for in process surface measurement’. In: Proceedings of the euspen International Conference – San Sebastian - June 2009. San Sebastian, Spain: European Society for Precision Engineering & Nanotechnology. . ISBN 13:978-0-9553082-6-0

Zeng, W., Jiang, X., Scott, P., Xiao, S. and Blunt, L. (2009) ‘A Fast Algorithm for the High Order Linear and Nonlinear Gaussian Regression filter’. In: Proceedings of the 9 th international conference of the european society for precision engineering and nanotechnology. San Sebastian, Spain: euspen. pp. 356-359. ISBN 978-0-9553082-6-0

Jiang, X (2009) ‘The evolution of surfaces and their measurement’. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia

Zhu, H., Blunt, L., Jiang, X. and Xiao, S. (2009) ‘Recognition of Features from Micro Scale Patterned Surfaces’. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia

Li, T., Leach, R., Jung, L., Jiang, X. and Blunt, L. (2009) Comparison of Type F2 Software Measurement Standards for Surface Texture London, UK: National Physical Laboratory, UK

Su, Y., Xu, Z. and Jiang, X. (2009) ‘Real-time VE Signal Extraction and Denoising Using Programmable Graphics HardwareInternational Journal of Automation and Computing , 6 (4), pp. 326-334. ISSN 1476-8186

Lu, W., Jiang, X., Scott, P. and Lan, X. (2009) ‘A Host System for Form Tolerance Specification in the Next-generation GPS based on AutoCAD’. In: The 11th CIRP Conference on Computer Aided Tolerancing “Geometric Variations within Product Life-Cycle Management”, 26-27 March 2009, Annecy, France

Zhu, H., Blunt, L., Jiang, X. and Shaojun, X. (2009) ‘Measurement and characterisation of micro nano-scale structured surfaces’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Zhang, X., Jiang, X. and Scott, P. (2009) ‘A new free-form surface fitting method for precision coordinate metrologyWear , 266 (5-6), pp. 543-547. ISSN 0043-1648

Martin, H. and Jiang, X. (2009) ‘Phase Feedback Active Stabilisation Of A Multiplexed Fibre Interferometer ’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Gao, F., Jiang, X. and Blunt, L. (2009) ‘Automated ballistic and tool mark identification’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Wang, J., Jiang, X., Blunt, L. and Leach, R. (2009) ‘Structured Surfaces, Measurements & Characterization’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Zhang, X., Jiang, X. and Scott, P. (2009) ‘The Orthogonal Distance Fitting Of Parametric Surfaces For Precision Coordinate Metrology ’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Lan, X., Jiang, X., Blunt, L., Xiao, S. and Xie, F. (2009) ‘Characterisation Platform For Surface Metrology’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Li, T., Blunt, L. and Jiang, X. (2009) ‘Uncertainty In Surface Roughness Measurement’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Muhamedsalih, H., Jiang, X. and Wang, K. (2009) ‘Surface Profile Height Measurement Using Optical Interferometry Method’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Zeng, W., Jiang, X., Scott, P. and Blunt, L. (2009) ‘New Geometrical Filtratation For Ultra-Precision And Micro,Nano Manufactured Products’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Blunt, L., Bills, P., Jiang, X., Hardacker, C. and Chakrararty, G. (2009) ‘The role of tribology and metrology in the latest development of bio-materialsWear , 266 (3-4), pp. 424-431. ISSN 0043-1648

2008

Blunt, L., Zhang, H., Barrans, S., Jiang, X. and Brown, L. (2008) ‘What results in fretting wear on polished femoral stemsTribology International , 42 (11), pp. 1605-1614. ISSN 0301-679X

Peng, H., Jiang, X. and Liu, X. (2008) ‘Concurrent optimal allocation of design and process tolerances for mechanical assemblies with interrelated dimension chainsInternational Journal of Production Research , 46 (24), pp. 6963-6979. ISSN 00207543

Su, Y., Xu, Z., Jiang, X. and Pickering, J. (2008) ‘Discrete wavelet transform on consumer-level graphics processing unit’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. Huddersfield: University of Huddersfield. pp. 40-47. ISBN 978-1-86218-067-3

Martin, H. and Jiang, X. (2008) ‘Stabilising fibre interferometers ’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. Huddersfield: University of Huddersfield. pp. 75-80. ISBN 978-1-86218-067-3

Zhu, H., Xiao, S., Jiang, X. and Blunt, L. (2008) ‘MEMS microstructured surface characterisation based on wavelet transform techniques’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. Huddersfield: University of Huddersfield. pp. 87-92. ISBN 978-1-86218-067-3

Xu, Y., Xu, Z., Jiang, X., Scott, P. and Pickering, J. (2008) ‘Evaluation on the categorical DBMS for the VirtualGPS knowledge system’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. Huddersfield: University of Huddersfield. pp. 81-86. ISBN 978-1-86218-067-3

Peng, H., Jiang, X., Xu, Z. and Liu, X. (2008) ‘Optimal tolerance design for products with correlated characteristics by considering the present worth of quality lossInternational Journal of Advanced Manufacturing Technology , 39 (1-2), pp. 1-8. ISSN 0268-3768

Lu, W., Jiang, X., Liu, X. and Xu, Z. (2008) ‘Compliance uncertainty of diameter characteristic in the next-generation geometrical product specifications and verificationMeasurement Science and Technology , 19 (10), pp. 105103-1. ISSN 0957-0233

Xu, Y., Xu, Z. and Jiang, X. (2008) ‘Implementation of a Category Theory-Based GPS Knowledge System for Product Design’. In: The 14th International conference on Automation & Computing, Saturday, 6th September 2008,, ICAC 2008 Conference

Su, Y., Xu, Z. and Jiang, X. (2008) ‘Stream-Based Data Filtering for Accelerating Metrological Data Characterization’. In: Proceedings of the 14th International Conference on Automation and Computing. : ICAC. pp. 81-85. ISBN 978-0-9555294-2-0

Zhang, H., Brown, L., Blunt, L., Jiang, X. and Barrans, S. (2008) ‘Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacementWear , 266 (5-6), pp. 566-569. ISSN 0043-1648

Zhang, H., Blunt, L., Jiang, X., Brown, L., Barrans, S. and Zhao, Y. (2008) ‘Femoral stem wear in cemented total hip replacementProceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine , 222 (5), pp. 583-592. ISSN 0954-4119

Zeng, W., Jiang, X., Scott, P. and Blunt, L. (2008) ‘Investigation on the noise separation in watt balance experimentsKey Engineering Materials , 381-382, pp. 619-622. ISSN 1013-9826

Zhang, X., Jiang, X. and Scott, P. (2008) ‘Orthogonal distance fitting of precision free form surfaces based on l1 norm’. In: Conference on Advanced Mathematical and Computational Tools in Metrology and Testing, 23 – 25 June 2008, Paris, France

Li, T., Jiang, X., Blunt, L., Scott, P. and Xiao, S. (2008) ‘The Design and Use of F1 Softgauges for Validating Surface Metrology SoftwareKey Engineering Materials , 381-382, pp. 643-646. ISSN 1013-9826

Zeng, W., Jiang, X., Scott, P. and Blunt, L. (2008) ‘Morphological Component Analysis based Detection of Transient Behaviour in Environmental Vibration for the Watt Balance’. In: 10th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 18th-22nd May 2008, Kongresshaus Zurich

Zhang, X. and Jiang, X. (2008) ‘Numerical analyses of the boundary effect of radial basis functions in 3D surface reconstructionNumerical Algorithms , 47 (4), pp. 327-339. ISSN 1017-1398

Blunt, L., Bills, P., Jiang, X. and Chakrabarty, G. (2008) ‘Improvement in the assessment of wear of total knee replacements using coordinate-measuring machine techniquesProceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine , 222 (3), pp. 309-318. ISSN 0954-4119

Yang, S., Jiang, X., Maxwell, G. and Wang, K. (2008) ‘An integrated optical coupler used in a fibre interferometry system for on-line surface measurementsOptics Communications , 281 (5), pp. 1099-1107. ISSN 0030-4018

Jiang, X., Zeng, W., Scott, P. and Ma, J. (2008) ‘Linear feature extraction based on complex ridgelet transformWear , 264 (5-6), pp. 428-433. ISSN 0043-1648

Wang, K., Martin, H. and Jiang, X. (2008) ‘Actively stabilized optical fiber interferometry technique for online/in-process surface measurementReview of scientific instruments , 79 (2), p. 023109. ISSN 0034-6748

Jiang, X., Scott, P. and Whitehouse, D. (2008) ‘Wavelets and their applications for surface metrologyCIRP Annals - Manufacturing Technology , 57 (1), pp. 555-558. ISSN 0007-8506

Jiang, X., Gu, F. and Ball, A. (2008) ‘Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis’. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield

Xu, Y., Xu, Z. and Jiang, X. (2008) ‘Category theory-based object-oriented data management for web-based virtual manufacturing International Journal of Internet Manufacturing and Services , 1 (2), pp. 136-159. ISSN 1751-6048

Yang, S. and Jiang, X. (2008) ‘The Roughness Measurement and Assessment of the Super-smooth Surface of Hard DisksKey Engineering Materials , 364-366, pp. 1174-1179. ISSN 1013-9826

Su, Y., Xu, Z. and Jiang, X. (2008) ‘GPGPU-based Gaussian Filtering for Surface Metrological Data Processing’. In: Information Visualisation, 2008. IV apos;08. 12th International Conference. : Information Visualisation, 2008. IV apos;08. 12th International Conference. pp. 94-99.

Martin, H., Wang, K. and Jiang, X. (2008) ‘Vibration compensating beam scanning interferometer for surface measurementApplied Optics , 47 (7), pp. 888-893. ISSN 0003-6935

2007

Jiang, X., Martin, H. and Wang, K. (2007) ‘Vibration compensating beam scanning interferometer for surface measurement’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. Huddersfield: University of Huddersfield. .

Zhang, X., Jiang, X. and Crampton, A. (2007) ‘Numerical Analysis of the Boundary Effect of Radial Basis Functions in 3D Surface Reconstruction’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. Huddersfield: University of Huddersfield. pp. 1-6.

Yang, S. and Jiang, X. (2007) ‘The beam propagation method used for the design of an integrated optical coupler’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. Huddersfield: University of Huddersfield. pp. 1-6.

Xu, Y., Xu, Z. and Jiang, X. (2007) ‘Exploration of a Category Theory-Based Object-Oriented Database for Surface Texture Information Management. ’. In: Proceedings of the First International Symposium on Data, Privacy, and E-Commerce November 1-3, 2007. London, UK: IEEE Computer Society. pp. 107-109. ISBN 978-0-7695-3016-1

Bills, P., Blunt, L. and Jiang, X. (2007) ‘Development of a technique for accurately determining clinical wear in explanted total hip replacementsWear , 263 (7-12), pp. 1133-1137. ISSN 0043-1648

Jiang, X (2007) ‘Foreword’. In: Theory and Methodology of GPS. Beijing: Higher Education Press. . ISBN 978-7-04-022489-4

Li, T., Jiang, X., Blunt, L., Scott, P. and Yao, S. (2007) ‘The Design and Use of F1 Softgauges for Validating Surface Metrology Software’. In: The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2007), 24-27 September 2007, Tohoku University, Sendai, Japan

Jiang, X., Scott, P., Whitehouse, D. and Blunt, L. (2007) ‘Paradigm shifts in surface metrology. Part I. Historical philosophyProceedings of The Royal Society A Mathematical Physical and Engineering Sciences , 463 (2085), pp. 2049-2070. ISSN 1364-5021

Jiang, X (2007) ‘The economic management of geometrical products variability: the next generation GPS’. In: 4th International CIRP-Sponsored Conference (DET2007) on Digital Enterprise Technology, 19-21 September 2007, University of Bath, UK

Xu, Y., Xu, Z. and Jiang, X. (2007) ‘Machining surface texture knowledge management using a category theory-based object-oriented database Communications of SIWN (formerly: System and Information Sciences Notes) , 1 (1), pp. 83-88. ISSN 1757-4439

Xie, F., Xiao, S., Blunt, L. and Jiang, X. (2007) ‘Component-based software framework for surface topography visualization and analysis’. In: The 11th International Conference on Metrology and Properties of Engineering, 17th-20th July 2007, University of Huddersfield, Huddersfield, UK

Zhang, X., Jiang, X. and Scott, P. (2007) ‘A new free-form surface fitting method for precision coordinate metrology’. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK

Wang, K., Jiang, X. and Martin, H. (2007) ‘Advances of optical fibre interferometer for on-line surface measurement’. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK

Li, T., Blunt, L., Jiang, X., Scott, P. and Xiao, X. (2007) ‘On the accuracy of roughness parameters’. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK

Li, T., Jiang, X., Blunt, L., Scott, P. and Xiao, S. (2007) ‘Comparison on F2 softgauges for surface texture’. In: 1st European Conference on Tribology (ECOTRIB), June 12-15, 2007, Ljubljana, Slovenia

Wang, K., Jiang, X., Martin, H. and Blunt, L. (2007) ‘Light-beam scanning interferometry for on-line ultra precision surface measurement’. In: 7th International Conference of the European Society for Precision Engineering and Nanotechnology 2007. Proceedings. Bedford: Euspen. pp. 302-305. ISBN 978-0-9553082-2-2

Jiang, X., Zeng, W., Smith, I., Scott, P. and Maletras, F. (2007) ‘The detection of transient behaviour in environmental vibration for the Watt balanceMeasurement Science and Technology , 18 (5), pp. 1487-1494. ISSN 0957-0233

Yan, W., Scott, P. and Jiang, X. (2007) ‘Structures of specification and verification knowledge-base in surface texture knowledge-based system’. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany

Peng, H., Liu, X., Jiang, X. and Wang, Y. (2007) ‘Concurrent tolerance design based on a comprehensive model of manufacturing cost-quality loss’. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany

Blunt, L., Jiang, X., Leach, R., Harris, P. and Scott, P. (2007) ‘The development of user-friendly software measurement standards for surface topography software assessmentWear , 264 (5-6), pp. 389-393. ISSN 0043-1648

Jiang, X., Wang, K., Martin, H. and Yang, S.(2007) Surface characteristic determining apparatus. WO2007144654.

Blunt, L., Jiang, X. and Scott, P. (2007) ‘A New Approach to Surface Metrology - Structured Surfaces’. In: Proceedings of the 7th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen) - Bremen, Germany, 2007. Bremen: euspen. pp. 254-257. ISBN 978-0-9553082-2-2

Jiang, X., Scott, P., Whitehouse, D. and Blunt, L. (2007) ‘Paradigm shifts in surface metrology. Part II. The current shiftProceedings of the Royal Society, A , 463 (2085), pp. 2071-2099. ISSN 1364-5021

Jiang, X., Scott, P. and Whitehouse, D. (2007) ‘Freeform surface characterisation - a fresh strategyCIRP Annals - 2007 , 56 (1), pp. 553-556. ISSN 1726-0604

2006

Brennan, J., Jiang, X., Crampton, A. and Leach, R. (2006) ‘Propagation of measurement uncertainty for surface texture parameters’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. Huddersfield: University of Huddersfield. pp. 1-6.

Wang, Y., Scott, P. and Jiang, X. (2006) ‘Category model to modeling the surface texture knowledge-base’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. Huddersfield: University of Huddersfield. pp. 1-7.

Yang, S. and Jiang, X. (2006) ‘The roughness measurement of the super-smooth surface of hard disks’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. Huddersfield: University of Huddersfield. pp. 1-7.

Bills, P., Blunt, L. and Jiang, X. (2006) ‘A metrology solution for determination of form deviation and wear in orthopaedic joint replacements’. In: 33rd Leeds-Lyon Symposium on Tribology, Tuesday 12th - Friday 15th September 2006, Trinity and all Saints College, Leeds

Yin, C., Lin, D., Liu, Z. and Jiang, X. (2006) ‘New advance in confocal microscopyMeasurement Science and Technology , 17 (3), pp. 596-600. ISSN 0957-0233

Jiang, X. and Mahadevan, S. (2006) ‘Bayesian cross-entropy methodology for optimal design of validation experimentsMeasurement Science and Technology , 17, pp. 1895-1908. ISSN 0957-0233

Jiang, X., Wang, K. and Martin, H. (2006) ‘Near common-path optical fibre interferometer for potentially fast on-line micro/nano scale surface measurementOptical Letters , 31, pp. 3603-3605. ISSN 0146-9592

Jiang, X., Lin, D., Blunt, L., Zhang, W. and Zhang, L. (2006) ‘Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique Measurement Science and Technology , 17, pp. 483-487. ISSN 0957-0233

Edwards, R., Sophian, A., Dixon, S., Tian, G. and Jiang, X. (2006) ‘Dual EMAT and PEC non-contact probe: applications to defect testing NDT & E International , 39 (1), pp. 45-52. ISSN 0963-8695

Xiao, S., Xie, F., Blunt, L., Scott, P. and Jiang, X. (2006) ‘Feature extraction for structured surface based on surface networks and edge detectionMaterials Science in Semiconductor Processing , 9 (1-3), pp. 210-214. ISSN 1369-8001

Abouelatta, O., El-Bediwi, A., Sakrana, A., Jiang, X. and Blunt, L. (2006) ‘Surface integrity of provisional resin materialsMeasurement Science and Technology , 17 (3), pp. 584-591. ISSN 0957-0233

Jiang, X. and Whitehouse, D. (2006) ‘Miniaturized optical measurement methods for surface nanometrology CIRP Annals - Manufacturing Technology , 55 (1), pp. 577-580. ISSN 0007-8506

2005

Li, H., Jiang, X. and Li, Z. (2005) ‘Combination of M-estimation and Gaussian filtering for characterizing 3D Engineering surfacesKey Engineering Materials , 295-296, pp. 459-464. ISSN 1013-9826

Zeng, W., Jiang, X., Gao, Y. and Xie, T. (2005) ‘Texture extraction and identification of 3D engineering surfaces Key Engineering Materials , 295-296, pp. 453-458. ISSN 1013-9826

Blunt, L., Jiang, X. and Scott, P. (2005) ‘Advances in micro and nano-scale surface metrology Key Engineering Materials , 295-296, pp. 431-436. ISSN 1013-9826

Brennan, J., Crampton, A., Jiang, X., Leach, R. and Harris, P. (2005) ‘Approximation of surface roughness profiles and parameters’. In: International Conference on Advanced Mathematical and Computational Tools in Metrology (AMCTM 2005), 27–29 June, 2005, Instituto Português da Qualidade, Caparica, Portugal

Zeng, W. and Jiang, X. (2005) ‘Complex wavelet transform based surface topography analysis’. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University , pp. 304-313

Zeng, W., Jiang, X. and Scott, P. (2005) ‘Metrological characteristics of dual-tree complex wavelet transform for surface analysisMeasurement Science and Technology , 16 (7), pp. 1410-1417. ISSN 0957-0233

Zeng, W., Jiang, X., Scott, P. and Blunt, L. (2005) ‘Metrological characteristics of complex wavelet transform for surface topography analysis’. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France

Blunt, L., Leach, R., Scott, P., Harris, P., Xiao, S., Li, T., Parkin, G. and Jiang, X. (2005) ‘Development of “softgauges” for surface profile metrology’. In: 5th Euspen International Conference, 9th-12th May 2005, Montpellier, France

Lin, D., Jiang, X., Zhang, W., Zhang, L. and Blunt, L. (2005) ‘Multiplexed fibre interferometer and its application on surface measurement’. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France

Brennan, J., Crampton, A., Jiang, X., Leach, R. and Harris, P. (2005) ‘Reconstruction of continuous surface profiles from discretely sampled data’. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France

Blunt, L., Xiao, S., Jiang, X. and Scott, P. (2005) ‘Geometrical characterisation of MST and microfluidic devices using novel surface metrology techniques’. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France

Brennan, J., Crampton, A., Jiang, X., Leach, R. and Harris, P. (2005) ‘Propagation of uncertainty in discretely sampled surface roughness profiles Advanced mathematical and computational tools in metrology VII , pp. 271-275.

Zhang, X., Lu, H., Jiang, X. and Li, Z. (2005) ‘A straightness error measurement method matched new generation GPSJournal of Physics: conference series , 13, pp. 402-405. ISSN 1742-6596

Bills, P., Brown, L., Jiang, X. and Blunt, L. (2005) ‘A metrology solution for the orthopaedic industryJournal of Physics , Series 13, pp. 316-319. ISSN 1742-6596

Wang, Y., Scott, P. and Jiang, X. (2005) ‘The structure of surface texture knowledgeJournal of Physics: conference series , 13, pp. 1-4. ISSN 1742-6596

Li, Z. and Jiang, X. (2005) ‘An international strategy for China's manufacturing industry and technical standards’. In: International Manufacturing Leaders Forum (IMLF 2005), 28th Feb-2nd March 2005, Glenelg Beach, Adelaide, South Australia

Ma, L., Jiang, X., Xu, Z. and Li, Z. (2005) ‘An investigation on the technical standard strategy for China's manufacturing industry Journal of Physics: conference series , 13, pp. 389-393. ISSN 1742-6596

Jiang, X. and Whitehouse, D. (2005) ‘7th International Symposium on Measurement Technology and Intelligent InstrumentsJournal of Physics , Conference series 13. ISSN 1742-6596

Wang, J., Jiang, X., Ma, L., Xu, Z. and Li, Z. (2005) ‘Uncertainty of spatial straightness in 3D measurementJournal of Physics , 13, pp. 220-223. ISSN 1742-6596

Brennan, J., Crampton, A., Jiang, X., Leach, R. and Harris, P. (2005) ‘Approximation of surface texture profilesJournal of Physics , Series 13, pp. 264-267. ISSN 1742-6596

Ma, J., Jiang, X. and Scott, P. (2005) ‘Complex ridgelets for shift invariant characterizaion of surface topography with line singularitiesPhysics Letters A , 344, pp. 423-431. ISSN 0375-9601

Li, H., Cheung, C., Lee, W., To, S. and Jiang, X. (2005) ‘Characterisation of surface roughness for ultra-precision freeform surfacesJournal of Physics: conference series , Series 13, pp. 32-35. ISSN 1742-6596

Zeng, W., Jiang, X. and Scott, P. (2005) ‘Complex ridgelets for the extraction of morphological features on engineering surfacesJournal Paper of Physics: Conference Series , 13, pp. 246-249. ISSN 1742-6588

2004

Lin, D., Jiang, X., Xie, F., Zhang, W., Zhang, L. and Bennion, I. (2004) ‘High stability multiplexed fibre interferometer and its application on absolute displacement measurement and on-line surface metrologyOptics Express , 12 (23), pp. 5729-5734. ISSN 1094-4087

Blunt, L., Jiang, X., Xiao, S. and Scott, P. (2004) ‘The use of interferometry and image analysis techniques for metrology of MST devices’. In: 8th International Symposium on Measurement and Quality Control in Production, 12th-15th October, 2004, Erlangen, Germany

Wang, J., Ma, L., Jiang, X., Xu, Z. and Li, Z. (2004) ‘Uncertainty of flatness least-square verification’. In: ISIST 2004, The Third International Symposium on Instrumentation Science and Technology, 18th-22nd August 2004, China

Jiang, X (2004) ‘Recent advances in micro-manufacturing and micro-system’. In: The 6th International Conference on Frontiers of Design and Manufacturing, 20th-24th June, 2004, Xi'an, China

Li, H., Jiang, X. and Li, Z. (2004) ‘Robust estimation in Gaussian filtering for engineering surface characterizationPrecision Engineering , 28 (2), pp. 186-193. ISSN 0141-6359

Ma, J., Jiang, X. and Blunt, L. (2004) ‘Complex wavelet transform for extraction of morphological features on surface topography’. In: euspen 4th International Conference, 30th May-3rd June 2004, Glasgow

Jiang, X. and Blunt, L. (2004) ‘Third generation wavelet for the extraction of morphological features from micro and nano scalar surfacesWear , 257, pp. 1235-1240. ISSN 0043-1648

Brennan, J., Mason, J., Jiang, X., Leach, R. and Harris, P. (2004) ‘Approximation of surface texture profiles and parameters’. In: 4th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 30th May - 3rd June 2004, Scottish Exhibition and Conference Centre (SECC), Glasgow

Liu, X., Cheung, K., Webb, D., Fiang, X., Xiao, S., Longstaff, A., Widiyarto, H. and Jiang, X. (2004) ‘Improved dynamic cutting force model in peripheral milling Part 2 Experimental verification and predictionInternational Journal of Advanced Manufacturing Technology , 24, pp. 794-805. ISSN 0268-3768

2003

Liu, X., Cheng, K., Webb, D., Jiang, X., Xiao, S., Longstaff, A., Widiyarto, H., Blunt, L. and Ford, D. (2003) ‘Experimental investigation of the machined surface waviness, vibrations and cutting forces in peripheral millingKey Engineering Materials, Advances in Abrasive Technology VI , pp. 213-218. ISSN 1013-9826

Xie, F., Zhang, W., Jiang, X., Zhang, L. and Bennion, I. (2003) ‘Novel spatial scanning technique for surface roughness measurementLasers and Electro-Optics Society, IEEELEOS , 1 (27-28), pp. 97-98.

Jiang, X. and Scott, P. (2003) ‘Review of surface texture work in ISO ’. In: 9th International Conference on Metrology and Properties of Engineering Surfaces, 10th-11th September 2003, Halmstad University, Sweden

Liu, X., Cheng, K., Webb, D., Longstaff, A., Widiyarto, M., Jiang, X., Blunt, L. and Ford, D. (2003) ‘Prediction and compensation of machining error in ball end milling for microscale curved surface’. In: EUSPEN International Topical Conference, 19 - 20 May 2003, Aachen, Germany , p. 181 -184

Blunt, L., Jiang, X. and Scott, P. (2003) ‘Advances in micro and nano-scale surface metrology’. In: ISMTII 2003, The Sixth International Symposium on Measurement Technology and Intelligent Instruments, 28 November - 1 December 2003, Academic Building, Hong Kong University of Science and Technology, Kowloon, Hong Kong

Jiang, X. and Blunt, L. (2003) ‘Surface analysis techniques to optimise the performance of CNC machine tools’. In: Laser Metrology and Machine Performance VI. Southampton: WIT Press. pp. 107-117. ISBN 9781853129902

Liu, X., Cheng, K., Webb, D., Longstaff, A., Widiyarto, M., Jiang, X., Blunt, L. and Ford, D. (2003) ‘Investigation of the cutting force coefficients in ball-end milling’. In: Laser Metrology and Machine Performance VI. Southampton: WIT Press. pp. 45-54. ISBN 9781853129902

Blunt, L., Jiang, X. and Scott, P. (2003) ‘Future developments in surface metrology’. In: Advanced Techniques for Assessment Surface Topography. London: Kogan Page. pp. 339-347. ISBN 1903996112

2002

Jiang, X., Blunt, L. and Scott, P. (2002) ‘Fundamental research into the filtration of surface texture in geometric product specification and verification ’. In: 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering - ICME 2002, 3rd-5th July 2002, Ischia, Italy

Scott, P., Jiang, X. and Blunt, L. (2002) ‘An overview of the relationship between approximation theory and filtration’. In: Algorithms for approximation IV : the proceedings of the Fourth International Symposium on Algorithms for Approximation, held at the University of Huddersfield, July 2001. Huddersfield: University of Huddersfield. pp. 188-196. ISBN 1862180407

2001

Jiang, X., Blunt, L. and Stout, K. (2001) ‘Application of the lifting wavelet to rough surfacesPrecision Engineering , 25 (2), pp. 83-89. ISSN 0141-6359

Jiang, X. and Blunt, L. (2001) ‘Advances in surface analysis technology’. In: Laser Metrology and Machine Performance V. Southampton, UK: WIT. pp. 247-258. ISBN 9781853128905

Jiang, X., Blunt, L. and Stout, K. (2001) ‘Lifting wavelet for three-dimensional surface analysisInternational Journal of Machine Tools and Manufacture , 41 (13-14), pp. 2163-2169. ISSN 0890-6955

Xiao, S., Jiang, X. and Blunt, L. (2001) ‘Multi-Scalar features extraction for the bioengineering nanoscalar surfaces on the basis of the wavelet analysis’. In: Proceedings of the Fifth International Symposium on Measurement Technology and Intelligent Instruments ISMTII 2001. : National Institute of Standards. pp. 153-159.

Jiang, X. and Blunt, L. (2001) ‘Morphological assessment of orthopaedic implants using multiscalar waveletsWear , 250, pp. 217-221. ISSN 0043-1648

Xiao, S., Jiang, X., Blunt, L. and Scott, P. (2001) ‘Comparison study of the biorthogonal spline wavelet filtering for areal rough surfacesInternational Journal of Machine Tools and Manufacture , 41 (13-14), pp. 2103-2111. ISSN 08906955

2000

Jiang, X., Blunt, L. and Stout, K. (2000) ‘Development of a lifting wavelet representation for surface characterizationProceedings of The Royal Society A Mathematical Physical and Engineering Sciences , 456 (2001), pp. 2283-2313. ISSN 13645021

Ziao, S., Jiang, X. and Blunt, L. (2000) ‘Three-dimensional functional parameters for characterization of the bio-engineering surface at different stages of wear’. In: 1st International Conference on Tribology in Environmental Design 2000 - The Characteristics of Interacting Surfaces. London, UK: Professional Engineering Publishing. pp. 155-161. ISBN 1-86058-266-4

Research Degree Supervision

Surface and Precision Metrology is the scientific investigation of ultra precision and micro/nano scale surface measurement, the development of methods for measuring these surfaces, and characterising and modelling of their measured data. Discovering the surface behaviour and creating methods to diagnose, monitor, and predict surface properties and functionalities are my main research interests, which I would like to train and supervise PhD students.

The candidate should have good scientific curiosity and considerable background in physics, or mathematics, or engineering science, or decent hands-on experiences in instrument design, surface measurement and machine tools. The five aspect subjects are as follows:

Available projects

Last updated Thursday 6 March 2014
Thank you for your feedback.

Your feedback has been sent to the University Web/E-Marketing Team.

Excellent
Good
Satisfactory
Needs improvement

Excellent
Good
Satisfactory
Needs improvement

Excellent
Good
Satisfactory
Needs improvement

VAT registration number 516 3101 90

All rights reserved ©