Dr Haydn Martinh.p.martin@hud.ac.uk | 01484 472167
Dr. Haydn Martin graduated with a BEng in Electronic Engineering from the University of Leeds in 2002. He then moved to the University of Huddersfield to study for an MSc in Embedded Systems Engineering, graduating in 2005.
Through his MSc project work he was invited to undertake PhD studies in the Centre for Precision Technology (CPT) at the University of Huddersfield. His project entitled, ‘Investigations into a Multiplexed Fibre Interferometer for On-line, Nanoscale, Surface Metrology’ was completed in 2009 under the supervision of Prof Jane Jiang and Prof Liam Blunt. The project outputs resulted in the production of an international patent and in 2009 he received the Vice-Chancellor’s Prize of Post-Graduate Researcher of the Year.
In 2009 Haydn was taken on as a Research Fellow at the CPT is now a Senior Research Fellow at the EPSRC Centre for Innovative Manufacturing in Advanced Metrology where he heads up the activities of the optical instrumentation research group.
Dr. Haydn Martin is a Senior Research Fellow at the EPSRC Centre for Innovative Manufacturing in Advanced Metrology at the University of Huddersfield. His field of research is in surface and precision metrology. His focus is on the development of novel sensing methods for producing high accuracy, stable and robust surface/dimensional metrology instrumentation targeted at embedded use within the field of high/ultra-precision and high-added value manufacture. The aim is to move metrology away from expensive, standalone, off-line instrumentation without sacrificing metrology performance.
Haydn’s research vision is for a tighter and more direct loop between metrology and machining to increase our ability to a) manufacture components to a higher level of complexity and precision, b) reduce the cost and improve efficiency of production. A tighter link between metrology and machining will not only enable the production of new technologies for high-end scientific applications, but also enable the commercialisation of novel technologies for the benefit of the public at large.
Haydn’s research combines such areas as interferometry, spectrometry, electro-optics, fibre optics, microscopy and state of the art integrated-optics. The combination of these techniques can provide the necessary attributes for embedded metrology: environmental robustness, remote/miniature probing, high speed, high sensitivity and high dynamic range.
Haydn currently co-supervises 4 PhD students in optical instrumentation research for surface metrology.
In 2012 Haydn was awarded membership of the newly created EPSRC Early Career Forum in Manufacturing Research. The forum comprises 20 members selected from academic institutions nationwide.
Kumar, P., Martin, H., Maxwell, G. and Jiang, X. (2012) ‘Design and development of a self calibrated optical chip interferometer for high precision on-line surface measurement’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. p. 152. ISBN 978-1-86218-106-9
Kumar, P., Martin, H., Maxwell, G. and Jiang, X. (2012) ‘Design and Development of a Self Calibrated Optical Chip Interferometer for High Precision On-line Surface Measurement’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. pp. 14-19. ISBN 978-1-86218-106-9
Hassan, M., Jiang, X. and Martin, H. (2012) ‘Comparison of the fringe visibility created by zero and first order diffracted beams in a dispersive interferometer’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. pp. 110-115. ISBN 978-1-86218-106-9
Gao, F., Jiang, X., Muhamedsalih, H. and Martin, H. (2011) ‘Wavelength scanning interferometry for measuring transparent films of the fusion targets’. In: 13th International Conference on Metrology and Properties of Engineering Surfaces 2011, 12th - 15th April 2011, Twickenham, UK , pp. 172-176
Gao, F., Jiang, X., Muhamedsalih, H. and Martin, H. (2011) ‘Wavelength scanning interferometry for measuring transparent films of the fusion targets’. In: 13th International Conference on Metrology and Properties of Engineering Surfaces 2011, 12th - 15th April 2011, Twickenham, UK , pp. 172-176
Jiang, X. and Martin, H. (2011) ‘Phase feedback fibre interferometer for surface profiling’ International Journal of Precision Technology , 2 (2/3), pp. 246-265. ISSN 1755-2060
Gao, F., Jiang, X., Muhamedsalih, H. and Martin, H. (2010) ‘Wavelength Scanning Interferometry for Thin Film Analysis of Fusion Target’. In: 3rd European Target Fabrication Workshop, 30 September-1 October, Oxford
Martin, H (2010) Investigations into a multiplexed fibre interferometer for on-line, nanoscale, surface metrology Doctoral thesis, University of Huddersfield.
Martin, H. and Jiang, X. (2010) ‘Rapid phase shifting fiber interferometer with optical stylus’ Optical Letters , 35 (5), pp. 655-657. ISSN 0146-9592
Martin, H. and Jiang, X. (2009) ‘Phase Feedback Active Stabilisation Of A Multiplexed Fibre Interferometer ’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield
Martin, H. and Jiang, X. (2008) ‘Stabilising fibre interferometers ’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. Huddersfield: University of Huddersfield. pp. 75-80. ISBN 978-1-86218-067-3
Wang, K., Martin, H. and Jiang, X. (2008) ‘Actively stabilized optical fiber interferometry technique for online/in-process surface measurement’ Review of scientific instruments , 79 (2). ISSN 0034-6748
Martin, H., Wang, K. and Jiang, X. (2008) ‘Vibration compensating beam scanning interferometer for surface measurement’ Applied Optics , 47 (7), pp. 888-893. ISSN 0003-6935
Jiang, X., Martin, H. and Wang, K. (2007) ‘Vibration compensating beam scanning interferometer for surface measurement’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. Huddersfield: University of Huddersfield. .
Wang, K., Jiang, X. and Martin, H. (2007) ‘Advances of optical fibre interferometer for on-line surface measurement’. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK
Wang, K., Jiang, X., Martin, H. and Blunt, L. (2007) ‘Light-beam scanning interferometry for on-line ultra precision surface measurement’. In: 7th International Conference of the European Society for Precision Engineering and Nanotechnology 2007. Proceedings. Bedford: Euspen. pp. 302-305. ISBN 978-0-9553082-2-2
Jiang, X., Wang, K., Martin, H. and Yang, S.(2007) Surface characteristic determining apparatus. WO2007144654.
Martin, H (2006) ‘A self stabilising multiplexed interferometer for on-line surface measurement’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. Huddersfield: University of Huddersfield. pp. 1-6.
Jiang, X., Wang, K. and Martin, H. (2006) ‘Near common-path optical fibre interferometer for potentially fast on-line micro/nano scale surface measurement’ Optical Letters , 31, pp. 3603-3605. ISSN 0146-9592
